A Comparison of R&D Supply Chains and Service and Manufacturing Supply Chains
Streszczenie w języku polskim
Purpose – This paper is a literature review. Due to novelty of R&D sourcing in compare with tangible manufacturing sourcing and intangible service sourcing, and lots of models and procedures from manufacturing sourcing were modified in services sourcing, we tried to compare manufacturing and services sourcing bold aspects with R&D souring to find out the possibilities of such modifications. Additionally, exploring on the similarities and differences could lighten up sourcing strategy selection processes.
Design/methodology/approach – Supply chain management is initiated in manufacturing companies, and then various methods, procedures and strategies are modified, developed, and applied at service sector organizations. Therefore, R&D supply chains can be understood by comparing various factors of manufacturing (tangible) and service (intangible) supply chains to find opportunities for modification or innovation in R&D supply chains. The supply chain is a system in which the input should pass out the processor to be converted into the appropriate output. Thus, in this study, inputs, outputs, and processors of supply chains are studied. Using the variation and range of supply chains factors as processor criteria, the most important characteristics of supply chains are studied: quality, cost, flexibility, competitiveness, resource utilization, and innovation.
Findings – The result of the study is a general comparison of R&D, manufacturing, and service supply chains in terms of these criteria: quality, cost, flexibility, competitiveness, resource utilization, and innovation that gives a synergetic view points
Originality/Value – Modifying and developing sourcing strategies and procedures in manufacturing and service sourcing are possible approaches. The possibilities and opportunities in R&D sourcing were evaluated. Subsequently, there are not any other researches which compare R&D sourcing with manufacturing and services.
Słowa kluczowe
Pełny tekst:
PDF (English)Bibliografia
Allon, G., and Federgruen, A. (2007), “Competition in service industries”, Operations Research, Vol. 55 No. 1, pp. 37–55.
Altiok, T., and Ranjan, R. (1995), “Multi-stage, pull-type production/inventory systems”, IIE Transactions, Vol. 27, pp. 190–200.
Aranda, D.A. (2003), “Service operations strategy, flexibility and performance in engineering consulting firms”, International Journal of Operations & Production Management, Vol. 23 No. 11, pp. 1401–1421.
Arze, E.C., and Svensson, B.W. (1997), “Development of international competitiveness in industries and individual firms in developing countries: the case of the Chilean forest-based industry and the Chilean engineering firm Arze, Recin´e and Asociados”, International Journal of Production Economy, Vol. 52, pp. 185–202.
Beamon, B.M. (1998), “Supply chain design and analysis: models and methods”, International Journal of Production Economics, Vol. 55 No. 3, pp. 281–294.
Beamon, B.M. (1999), “Measuring supply chain performance”, International Journal of Operations & Production Management, Vol. 19 No. 3, pp. 275–292.
Benner, M.J., and Tushman, M.L. (2003), “Exploitation, exploration, and progress management: the productivity dilemma”, Academy Management Review, Vol. 28, pp. 238–256.
Bolton, R.N., and Drew, J.H. (1991), “A longitudinal analysis of the impact of service changes on customer attitudes”, Journal of Marketing, pp. 1–9.
Camm, J.D., Chorman, T.E., Dill, F.A., Evans, J.R., Sweeney, D.J., and Wegryn, G.W. (1997), “Blending OR/MS, judgment, and GIS: restructuring P&G”s supply chain”, Interfaces, Vol. 27 No. 1, pp. 128–142.
Carmignani, G. (2009), “Supply chain and quality management: the definition of a standard to implement a process management system in a supply chain”, Business Process Management Journal, Vol. 15 No. 3, pp. 395–407.
Carmon, Z., Shanthikumar, J.G., and Carmon T.F. (1994), “A psychological perspective on service segmentation: the significance of accounting for consumers perception of Waiting and Service”, Management Science, Vol. 41, pp. 1806–1815.
Chambers, S. (1992), “Flexibility in the Context of Manufacturing Strategy”, in Voss, C.A. (Ed.), Manufacturing Strategy. Process and Content, Chapman and Hall, London, England, pp. 283–295.
Christopher, M. (1992), Logistics and Supply Chain Management, Pitman, London, England.
Cleveland, G., Schroder, R.G., and Anderson, J.C. (1989), “A theory of production competence,” Decision Science, Vol. 20 No. 4, pp. 655–688.
Cohen, M.A., and Lee, H.L. (1988), “Strategic analysis of integrated production-distribution systems: models and methods”, Operations Research, Vol. 36 No. 2, pp. 216–228.
Cole, R. (2011), “What really happened to Toyota”, Sloan Management Review, Vol. 52 No. 4, pp. 29–35.
Cooper, R.G., and Kleinschmidt, E.J. (1994), “Determinants of timeliness in product development”, Journal of Product Innovation Management, Vol. 11 No. 5, pp. 381–396.
D’Souza, D.E., and Williams, F.P. (2000), “Toward a taxonomy of manufacturing flexibility dimensions”, Journal of Operations Management, Vol. 18 No. 5, pp. 577–593.
Dale, B.G., Cooper, C.L., and Wilkinson, A. (1997), Managing Quality and Human Resources; A Guide to Continuous Improvement, Blackwell, Oxford, England.
Dunk, A.S., and Kilgore, A. (2001), “Short-term R&D bias, competition on cost rather than innovation, and time to market”, Scandinavian Journal of Management, Vol. 17 No. 4, pp. 409–420.
El Mhamedi, A., and Binder, Z. (1992), “Socio-technical design and evaluation of production systems,” International Journal of Systems Science, Vol. 23 No. 7, pp. 1141–1154.
Ellram, L.M., Tate, W.L., and Billington, C. (2004), “Understanding and managing the services supply chain”, Journal of Supply Chain Management, Vol. 40 No. 4, pp. 17–32.
Feurer, R., and Chaharbaghi, K. (1994), “Defining competitiveness: a holistic approach”, Management Decision, Vol. 32 No. 2, pp. 49–58.
Fish L. A. (2011), Supply Chain Quality Management, Supply Chain Management – Pathways for Research and Practice, Prof. Dilek Onkal (Ed.), ISBN: 978-953-307-294-4, InTech, DOI: 10.5772/19973. Available from: http://www.intechopen.com/books/supply-chain-management-pathways-for-research-and-practice/supply-chain-quality-management
Fitzgerald, L., Johnston, R., Brignall, T.J., Silvestro, R., and Voss, C. (1991), Performance Measurement in Service Businesses, CIMA, London, England.
Frei, F.X. (2006), “Breaking the trade-off between efficiency and service”, Harvard Business Review, Vol. 84 No. 11, pp. 92–101.
Gardiner, L.R., and Gardiner S.C. (1997), “A framework of the systemic control of organizations,” International Journal of Production Research, Vol. 35 No. 3, pp. 597–609.
Grönroos, C. (1988), “Service quality: the six criteria of good service quality”, Review of Business, Vol. 9 No. 3, pp. 10–13.
Gupta, Y.P., and Somers, T.M. (1996), “Business strategy, manufacturing flexibility, and organizational performance relationships: a path analysis approach”, Production and Operations Management, Vol. 5 No. 3, pp. 204–231.
Harrison, A., and Van Hoek, R. (2011), Logistics Management & Strategy Competing through the Supply Chain, 4th edition, Financial Times Press, NY.
Haywood-Farmer, J. (1988), “A conceptual model of service quality”, International Journal of Operations & Production Management, Vol. 8 No. 6, pp. 19–29.
Heshmati, A. (2003), “Productivity Growth, efficiency and outsourcing in manufacturing and service industries”, Journal of Economic Surveys, Vol. 17 No. 1, pp. 79–112.
Huang, S.H., Uppal, M., and Shi, J. (2002), “A product driven approach to manufacturing supply chain selection”, Supply Chain Management, Vol. 7 No. 3, pp. 189–199.
Huchzermeier, A., and Loch, C.H. (2001), “Project management under risk: using the real options approach to evaluate Flexibility in R&D”, Management Science, Vol. 47 No. 1, pp. 85–101.
Iravani, S.M., Van Oyen, M.P., and Sims, K.T. (2005), “Structural flexibility: a new perspective on the design of manufacturing and service operations,” Management Science, Vol. 51 No. 2, pp. 151–166.
Ishii, K., Takahashi, K., and Muramatsu, R. (1988), “Integrated production, inventory and distribution systems”, International Journal of Production Research, Vol. 26 No. 3, pp. 473–482.
Jonrinaldi and Zhang, D.Z. (2013), “An integrated production and inventory model for a whole manufacturing supply chain involving reverse logistics with finite horizon period”, Omega, Vol. 41 No. 3, pp. 598–620.
Kao, C., and Shiang-Tai, Liu, S.T. (1999), “Competitiveness of manufacturing firms: an application of fuzzy weighted average”, Systems, Man and Cybernetics, Part A: Systems and Humans, IEEE Transactions on, Vol. 29 No. 6, pp. 661–667.
Kim, J.S., and Arnold, P. (1993), “Manufacturing competence and business performance: a framework and empirical analysis,” International. Journal of Operation Management, Vol. 13 No. 10, pp. 47–61.
Klassen, R.D., and Menor, L.J. (2007), “The process management triangle: an empirical investigation of process trade-offs”, Journal of Operations Management, Vol. 25 No. 5,
pp. 1015–1034.
Koste, L.L., and Malhotra, M.K. (1999), “A theoretical framework for analyzing the dimensions of manufacturing flexibility”, Journal of Operations Management, Vol. 18 No. 1, pp. 75–93.
Krajewski, L.J., Ritzman, L.P., and Malhotra, M.K. (2012), Operations Management: Processes and Supply Chains, Pearson, London, England.
Kuei, C., Madua, C., and Lin, C. (2008), “Implementing supply chain quality management”, Total Quality Management, Vol. 19 No. 11, pp. 1114–1127.
Lee, H.L., and Feitzinger, E. (1995), “Product configuration and postponement for supply chain efficiency”, Fourth Industrial Engineering Research Conference Proceedings, Institute of Industrial Engineers, pp. 43–48.
Lee, H.L., Billington, C., and Carter, B. (1993), “Hewlett-Packard gains control of inventory and service through design for localization”, Interfaces, Vol. 23 No. 4, pp. 1.
Lehtonen, T., and Salonen, A. (2006), “An empirical investigation of procurement trends and partnership management in FM services – a Finnish survey”, International Journal of Strategic Property Management, Vol. 10, pp. 65–78.
Liao, Z., and Cheung, M.T. (2002), “Do competitive strategies drive R&D? An empirical investigation of Japanese high-technology corporations”, Journal of High Technology Management Research, Vol. 13 No. 2, pp. 143–156.
Lööf, H., and Heshmati, A. (2002), “Knowledge capital and performance heterogeneity: a firm-level innovation study”, International Journal of Production Economics, Vol. 76 No. 1, pp. 61–85.
Malhotra, M.K., and Robinson, C.J. (2005), “Defining the concept of supply chain quality management and its relevance to academic and industrial practice”, International Journal of Production Economics, Vol. 96, pp. 315–337.
Menke, M.M. (1991), “Tools for improving the quality of R&D management”, Technology Management: the New International Language IEEE, pp. 162.
Mentzer, J.T., Man, S., and Zacharia, Z.G. (2000), “The nature of interfirm partnering in supply chain management”, Journal of Retailing, Vol. 76 No. 4, pp. 549–568.
Olhager, J., and Johansson, P. (2012), “Linking long-term capacity management for manufacturing and service operations”, Journal of Engineering and Technology Management, Vol. 29 No. 1, pp. 22–33.
Olhager, J., Rudberg, M., and Wikner, J. (2001), “Long-term capacity management: linking the perspectives from manufacturing strategy and sales and operations planning”, International Journal of Production Economics, Vol. 69 No. 2, pp. 215–225.
Parasuraman, A., Zeithaml, V.A., and Berry, L.L. (1985), “A conceptual model of service quality and its implications for future research”, Journal of Marketing, Vol. 49 No. 4, pp. 41–50.
Pillai, A.S., and Tiwari, A. (1995), “Enhanced PERT for programme analysis, control and evaluation: PACE”, International Journal of Project Management, Vol. 13 No. 1, pp. 39–43.
Platje, A., Seidel, H., and Wadman, S. (1994), “Project and portfolio planning cycle. Project-based management for the multiproject challenge”, International Journal of Project Management, Vol. 12 No. 2, pp. 100–106.
Porter, M.E. (2000), “Location, competition, and economic development: local clusters in a global economy”, Economic Development Quarterly, Vol. 14 No. 1, pp. 15–34.
Prajogo, D.I., and Sohal, A.S. (2001), “TQM and innovation: a literature review and research framework”, Technovation, Vol. 21 No. 9, pp. 539–558.
Pyke, D.F., and Cohen, M.A. (1994), “Multi-product integrated production-distribution systems”, European Journal of Operational Research, Vol. 74 No. 1, pp. 18–49.
Roberts, K., and Weitzman, M.L. (1981), “Funding criteria for research, development, and exploration projects”, Econometric Society, Vol. 49, pp. 1261–1288.
Rosko, M.D. (2001), “Cost efficiency of US hospitals: a stochastic frontier approach”, Health Economics, Vol. 10 No. 6, pp. 539–551.
Safizadeh, M.H., Field, J.M., and Ritzman, L.P. (2008), “Sourcing practices and boundaries of the firm in the financial services companies”, Strategic Management Journal, Vol. 29, pp. 79–91.
Santiago, L.P., and Vakili, P. (2005), “On the value of flexibility in R&D projects”, Management Science, Vol. 51 No. 8, pp. 1206–1218.
Schwartz, E., and Trigeorgis, L. (2004), Real Options and Investment under Uncertainty: Classical Readings and Recent Contributions. MIT Press, Boston.
Seth, N, Deshmukh S.G., and Vrat, P. (2006), “A conceptual model for quality of service in the supply chain”, International Journal of Physical Distribution & Logistics Management, Vol. 36 No. 7, pp. 547–575.
Seth, N., Deshmukh, S.G., and Vrat, P. (2005), “Service quality models: a review”, International Journal of Quality & Reliability Management, Vol. 22 No. 9, pp. 913–949.
Sethi, A.K., and Sethi, S.P. (1990), “Flexibility in manufacturing: a survey”, International Journal of Flexible Manufacturing Systems, Vol. 2 No. 4, pp. 289–328.
Siegel, D., and Griliches, Z. (1992), “Purchased Services, Outsourcing, Computers, and Productivity in Manufacturing”, in Griliches, Z. (Ed.), Output Measurement in Service Sector, University of Chicago Press, Chicago, IL.
Simchi-Levi, D., Kaminsky, P., and Simchi-Levi, E. (2007), Designing & Managing the Supply Chain, 3rd edition, McGraw-Hill, NY.
Slack, N. (1983), “Flexibility as a manufacturing objective”, International Journal of Operations and Production Management, Vol. 3 No. 3, pp. 4–13.
Slack, N. (1991), The Manufacturing Advantage, Mercury Books, London, England.
So, K.C. (2000), “Price and time competition for service delivery”, Manufacturing & Service Operations Management, Vol. 2 No. 4, pp. 392–409.
Suarez, F.F., Cusumano, M.A., and Fine, C.H. (1996), “An empirical study of manufacturing flexibility in printed circuit board assembly”, Operations Research, Vol. 44 No. 1, pp. 223–240.
Thoma, B., and O’Sullivan, D. (2011), “Study on Chinese and European automotive R&D – comparison of low cost innovation versus system innovation”, Procedia – Social and Behavioral Sciences, Vol. 25, pp. 214–226.
Towill, D.R., and Del Vecchio, A. (1994), “The application of filter theory to the study of supply chain dynamics”, Production Planning and Control, Vol. 5 No. 1, pp. 82–96.
Tzafestas, S., and Kapsiotis, G. (1994), “Coordinated control of manufacturing/supply chains using multi-level techniques”, Computer Integrated Manufacturing Systems, Vol. 7 No. 3, pp. 206–212.
Ulrich, K.T., and Eppinger, S.D. (2008), Product Design and Development, McGraw-Hill, New York, NY.
Vickery, S.K., Droge, C., and Markland, R.E. (1991), “Production competence and business strategy: do they affect business performance?”, Decision Sciences, Vol. 24 No. 2, pp. 436–455.
Wheelwright, S.C., and Clark, K.B. (1992), Revolutionary Product Development, Free Press, New York, NY.
DOI: http://dx.doi.org/10.17951/ijsr.2013.2.1-2.73
Data publikacji: 2013-07-14 00:00:00
Data złożenia artykułu: 2015-07-18 03:14:06
Statystyki
Wskaźniki
Odwołania zewnętrzne
- Brak odwołań zewnętrznych
Prawa autorskie (c) 2015 Marzieh ShahmariChatghieh, Harri Haapasalo, Anyanitha Distanont
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
Powyższa praca jest udostępniana na lcencji Creative Commons Attribution 4.0 International License.