Operation Risk Management of Planning and Piping Design in a Large Petrochemical Plant Project

Kamolwan Deeswasmongkol, Punnamee Sachakamol

Abstract


Purpose – The purpose of this paper is to present practical and research lessons learned from analysis and the identification of failures which can occur. Failure mode and effects piping analysis (FMEPA) has been shown to be an effective way of improving piping design reliability. FMEPA is also employed for making sample control plans. Design/methodology/approach – To reduce project losses by using failure mode and effects piping analysis as a tool for analysis of the piping design department. The samples were selected from five projects. It was found that nine major points yielded a risk priority number (RPN) higher than 125. Findings – Results of RPN calculation concerning four topics revealed that the RPN value was reduced from 211 to 75, demonstrating a 64.4 percent improvement. Research limitations/implications – The study is limited to a planning and piping case study which considers RPN. Testing of the performance network regression model can be employed in companies, in which quality control has been implemented of solutions for failure prevention of piping design. Practical implications – This paper serves practitioners as a guideline and tool to understand and implement the FMEPA methodology. At this level, management sets the limits for determining measures. Management also decides whether a risk is acceptable or not. Management needs to clarify which risk priority number (RPN) represents the critical level above which requires risk reduction. Social implications – Conflicts and social unrest can cause costly delays to new projects and operations. Conflicts can also result in damage to a company’s reputation. This depends on the company’s responses to the conflict and the consequences or perceived consequences of its behavior and actions. Originality/value – This paper furnishes lessons learned for practitioners in various industrial sectors in preference to other methods of risk assessment and control activities.

Keywords


failure mode and effects analysis; piping design and drawing process; control plan

Full Text:

PDF

References


Antonio, S., Giovanni S., Angela C. and Francesca A. (2001), “FMEA methodology design, implementation an integration with HACCP system in a food company”, Food Control. Vol. 13, pp. 495–501.

Antikalamos and Kalamata, H. (2011), “Application of ISO 22000, Failure Mode, and Effect Analysis (FMEA) Cause and Effect Diagrams and Pareto in Conjunction with HACCP and Risk Assessment for Processing of Pastry Products”. Critical Reviews in Food Science and Nutrition, Vol. 51, pp. 762–782.

Cassanelli, G., Mura G., Fantini , F., M. Vanzi. and Plano B. (2011), “Failure Analysis-assisted FMEA”. Microelectronics Reliability, Vol. 46, pp. 1795–1799.

Ching, J., and Chao, C. (2014). “Risk management for outsourcing biomedical waste Disposal – Using the failure mode and effects analysis”. Waste Management. Vol. 34, pp. 1324–1329.

Jang Shyong, Y., Hung Ta K. and Wen Fang W. (2006), Case studies of risk-informed in service inspection of nuclear piping systems. Nuclear Engineering and Design, Vol. 236, pp. 35–46.

Jirawongsawad K., et. al., 2007. “Applying FMEA and AHP for Process Production Improvement; Case Study Ceramic Industries”, Industrial Engineering Network Seminar, Thailand.

Klomjit, P., and Kaewsaithom, P. (2010), Applications of Reliability Centered Maintenance for Reducing Downtime in a Paper Plant, “Department of Industrial Engineering and Management”, Faculty of Engineering and Industrial Technology, Silpakorn University, Thailand.

Pasuk, W., et al. (2009), “Waste Reduction for Chromium Plating by Using Six Sigma Case Studies from Chromium Plating Industries”, Industrial Engineering Network Conference, Thailand.

Prada, A., and N. Kuptadsathien. (2007), “Failure Mode Analysis and Effects in Anti Fire Suite Production and Control Plan for Increasing Productivity: Case Study Anti Fire Suite Industries”, Industrial Engineering Network, Thailand.

Rittipakdee, A. (2011), “Quality Improvement for Painting Process in Auto mobile Industries”. Industrial Engineering, Chulalongkorn University, Thailand.

Scipioni, A., Saccarola, G., Centazzo, A., & Arena, F. (2002), “FMEA methodology design, Implementation and integration with HACCP system in a food company”. Food Control, Vol. 13, pp. 495–501.

Tavner, J., Higgins, A., Arabian H., Long H., Y Feng (2010), “An FMEA method to compare prospective wind turbine design reliabilities” , European Wind Energy Conference (EWEC 2010), Berlin, Germany.

Thongpraiwan, W., and Kuptadsathien, N. (2010), “Applying FMEA for Glass Moulding Design and Development Improvement”, Industrial Operation and Development Symposium”, Thammasart University, Thailand.

Varsha, M., and Vilas, B. (2014). “Application of 7 Quality Control (7 QC) Tools for Continuous Improvement of Manufacturing Processes”, International Journal of Engineering Research and General Science .Vol.2, No. 4, pp. 710–730.




DOI: http://dx.doi.org/10.17951/ijsr.2014.3.0.45
Date of publication: 2015-05-22 13:06:46
Date of submission: 2015-04-22 18:41:49


Statistics


Total abstract view - 759
Downloads (from 2020-06-17) - PDF - 0

Indicators



Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 International Journal of Synergy and Research

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.